Quality Pharmaceutical And Industry Use Pure Steam Generator

AIPAK Engineering pure steam generator is a kind of equipment that adopts purified water as raw material water and heated by industrial steam to produce clean pure steam. This series of equipment can be used for sterilization and disinfection of pharmaceutical equipment and various process production lines (pipelines, storage tanks, etc.). The pure steam condensed water produced meets the requirements of the Chinese Pharmacopoeia (CP2020), United States Pharmacopoeia (USP43), European Pharmacopoeia (EP10) for water for injection.

The qualified raw water is pressurized by the multi-stage pump and then enters the pipeline condenser 2, uses waste heat to heat the raw water, and then enters the preheater 2 and the preheater 1. After heat exchange, it enters the evaporator and is sprayed into the heating tube by the material water distributor. Make material water to flow in a film status on the tube wall, which will be heated and vaporized by industrial steam. The secondary steam with water droplets generated after gasification enters the steam-water separation device from the lower end of the evaporation chamber, and becomes ultra-pure steam after three-stage separation.

Quality Pharmaceutical And Industry Use Pure Steam Generator Features:

1.The evaporator and separator from into a huge connector, which make full use of heat. The whole equipment can reach the largest productivity at a short time in the state of standby.

2.Raw water get full use as the level control, it is equipment which can real save energy.

3.With simple structure and easy disassembly and install.

4.With sanitary PTFE sealing.

5.The parts(including pipes),which are contacted with raw water, pure steam and pure steam condensed water, are adopted SS316L

6.The surfaces of evaporator and separator are using acid cleaning, passivation processing.

7.Double-faced automatic welding with argon shield guarantees the welding quality.

Quality Pharmaceutical And Industry Use Pure Steam Generator Technical Specification:

Model Technical parameter	Industrial steam pressure(MPa)	Pure steam output(L/H)	Industrial steam consumption (L/H)	Raw water consumption (L/H)	Power(kW)
APE100	0.3	≥100	110	110	0.6
APE 200	0.3	≥200	220	220	0.6
APE300	0.3	≥300	330	330	0.6
APE 400	0.3	≥400	440	440	0.6
APE 500	0.3	≥500	550	550	0.6
APE 750	0.3	≥750	825	825	0.8
APE 1000	0.3	≥1000	1100	1100	0.8
APE 1500	0.3	≥1500	1650	1650	1.2
APE 2000	0.3	≥2000	2200	2200	1.6